How to monitor audio digitizations in Peak 4 through the mixer
(Redirected from How to monitor audio digitizations with the mixer & speakers setup)
Here are the settings you'll need to monitor digitizations using the mixer and speakers.
1. Turn on the MONA Echo.
2. Turn on the Mixer.
3. Turn on the speakers
4. Open Peak 4. Click Audio>Sound Out and select Core Audio. The settings should be as follows: Clock Source: Internal; Sample Rate: as per your project; Play Through: 0 1 & 2. Click OK.
5. Check the record settings in Peak by clicking on the record settings icon. The settings should be as per your digitization requirements, but make sure the box next to monitor is NOT checked off.
6. Turn the volume up on the mixer mains to about midway. Start playback of your recording. You should be able to hear it. Rewind & start digitizing.
